ATTEN tip T800-SK/T800-0.25I / T800-1.2C /T800-K /T800-0.25ILF/ T800-2.4D / for ST series soldering iron K head cutter head soldering iron tip

ATTEN AT90DH ST-100 with iron tip

The ATTEN tip has the following features:
1. The material adopts imported oxygen-free copper as raw material, and the outer shape is accurate in processing and fast in heat conduction;
2. The upper and lower tin flow is smooth, the performance is stable, and the solder joints after welding are smooth and even;
3. The appearance is made by special machinery and technology, and the size is accurate;
4. The flow of tin is smooth, the life span exceeds 20,000 solder joints, Antai quality, trustworthy!
5. The electric acid adopts the first sodium technology, which has superior anti-corrosion, anti-oxidation and welding life of over 20,000 points.

Tip of choice
Size

A. Size of the solder joint: Choosing the right camel head according to the size of the solder joint can make the work smoother.

The tip is too small and the temperature is not enough; too much, there will be a lot of solder melting, and the series control is difficult.

B. Solder Joint Intensiveness: Soldering on denser boards, using a finer tip can reduce the chance of tin bridge formation.
2. Shape

A. Types of soldering components: Different types of electronic components, such as resistors, capacitors, SOJ chips, and SOP chips,

require the cooperation of different soldering iron tips to improve work efficiency.

B. Easiness of solder joint contact. If the solder joint location is surrounded by some higher electronic

components and is difficult to contact, a longer and younger tip can be used.

C. Tin content: If more tin is needed, a soldering iron tip with a larger tinned surface area can be used.